Retrofit-led regeneration in Greater Manchester
One statistic I have used a lot in the last 6 years is that if we are to meet the target of reducing CO2 emissions by 80% of 1990 levels by 2050, we need to refurbish one home every 45 seconds. Yes, you read that right, one home every forty-five seconds! While this is an important statistic to get people to sit up and take notice, we now need to move the discussion on from what needs to be done, to how it can be done, and which barriers we need to overcome.
On 21 March 2018, the Mayor of Greater Manchester, Andy Burnham, will be holding a green summit setting out his vision for a carbon neutral Greater Manchester.
In the lead up to this, I attended an insightful workshop in Manchester with delegates from the ten local authorities that make up the Greater Manchester Combined Authority as well as delegates from the UKGBC and the Energy Saving Trust, among others. This was to discuss the need for quality domestic retrofit projects in the UK and to inform the Mayor of Greater Manchester on what needs to be included in his green vision for Greater Manchester.
A common and recurring theme from the workshop was the need for high quality retrofit projects that are done on a large scale, using a holistic approach, which doesn’t just focus on energy efficiency.
It is not just the energy performance of the homes that important in a retrofit. Installing energy efficiency measures is a great opportunity to improve the health and wellbeing of the occupants by ensuring factors such as daylighting, ventilation and security are improved.
What was also apparent from the discussion was the need to perform ‘deep’ retrofits to existing homes, at a community scale to bring them up to the highest possible energy efficiency standard. This is to make sure we meet our 2050 targets without having to retrofit the same homes multiple times.
To achieve the retrofitting at this scale, collaboration between local authorities across the UK and a regular long term funding mechanism need to be in place. Having a long-term mechanism in place, means a level of trust would be developed between the product manufacturers and the householders, to ensure that retrofit works can be done to their homes. This will also generate interest among the local community for work to be done on their homes and to contribute to the local economy.
One final outcome from the workshop was that technical standard needs to be used on retrofit projects, to make sure the required performance will be met in practice, and that the retrofit itself is of a high quality.
Overall, the workshop was positive about what can be done to improve the quality and energy performance of existing homes, and that there is a place for standards such as BREEAM, Passivhaus and EnergieSprong to help drive these improvements forward.
One other key theme from the workshop is a need for a joined up approach to retrofit and a common standard to work to. One such scheme is BREEAM Domestic Refurbishment.
BREEAM Domestic Refurbishment is a third-party independent certification standard that assesses the sustainability of home retrofit projects using a holistic approach. This scheme covers issues ranging from health and wellbeing of the occupants to the materials used in the refurbishment as well as the energy efficiency of the home. Since the launch in 2012, over 2,800 homes have been certified post refurbishment at the time of writing. More information is available here: https://www.breeam.com/discover/technical-standards/refurbishment-and-fit-out/
An independent review of Consumer Advice, Protection, Standards and Enforcement for Energy Efficiency and Renewable E443pxnergy was published in December 2016. The key recommendations from this review is centred around a quality mark for energy efficiency measures and technical code of practice and standards for their installation, as well as protection for the consumer. More information on this, including the full report, is available at www.eachhomecounts.com
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Plumbing and heating for sustainability in new properties
Technical Engineer runs through changes in regulations, innovations in materials, and product systems.
Awareness of the Carbon Border Adjustment Mechanism
What CBAM is and what to do about it.
The new towns and strategic environmental assessments
12 locations of the New Towns Taskforce reduced to 7 within the new towns draft programme and open consultation.
Buildings that changed the future of architecture. Book review.
The Sustainability Pathfinder© Handbook
Built environment agency launches free Pathfinder© tool to help businesses progress sustainability strategies.
Government outcome to the late payment consultation, ECA reacts.
IHBC 2025 Gus Astley Student Award winners
Work on the role of hewing in UK historic conservation a win for Jack Parker of Oxford Brookes University.
Future Homes Building Standards and plug-in solar
Parts F and L amendments, the availability of solar panels and industry responses.
How later living housing can help solve the housing crisis
Unlocking homes, unlocking lives.
Preparing safety case reports for HRBs under the BSA
A new practical guide to preparing structural inputs for safety cases and safety case reports published by IStructE.
Male construction workers and prostate cancer
CIOB and Prostate Cancer UK encourage awareness of prostate cancer risks, and what to do about it.
The changed R&D tax landscape for Architects
Specialist gives a recap on tax changes for Research and Development, via the ACA newsletter.
Structured product data as a competitive advantage
NBS explain why accessible product data that works across digital systems is key.
Welsh retrofit workforce assessment
Welsh Government report confirms Wales faces major electrical skills shortage, warns ECA.
A now architectural practice looks back at its concept project for a sustainable oceanic settlement 25 years on.
Copyright and Artificial Intelligence
Government report and back track on copyright opt out for AI training but no clear preferred alternative as yet.
Embedding AI tools into architectural education
Beyond the render: LMU share how student led research is shaping the future of visualisation workflows.
Why document control still fails UK construction projects
A Chartered Quantity Surveyor explains what needs to change and how.
Inspiration for a new 2026 wave of Irish construction professionals.
New planning reforms and Warm Homes Bill
Take centre stage at UK Construction Week London.



























